Rani Tardis V1
Rani Tardis V1
3D
Published 2020-03-19T14:56:50+00:00
The Rani's Tardis as seen in her first appearance in the classic series has been made to resemble a large cabinet.
This cabinet design has a single opening door with a circular motif on it's front face. The door, along with the walls of the cabinet are framed with a round moulding.
The two side pillars have been designed to add lighting strips to get the same on-screen effect. The model has been scaled to fit in with the current figure line-up.
While there are many versions of the Doctor's many different Tardis's available online, this type hasn't been widely released. The model requires very little cleanup once printed and takes paint very well.
I look forward to seeing the finished results those may post here in the future.
The Base Unit and roof-Frame are best printed with supports, all other parts can be printed without support material. Test model was printed with a raft on all parts but should work with a brim as well. The parts are designed to be glued together on the faces and have a tight tolerance to help keep the box square.
| Date published | 19/03/2020 |