Raspberry Pi 4 Case – PiMesh
$2.99 Raspberry Pi 4 Case – PiMesh
3D
Published 2019-09-23T11:37:01+00:00
PiMesh is a Raspberry Pi 4 case with a geometric mesh pattern that is easy to print.
This is a mostly toolless design with a friction fit. There are two versions of the model – one totally toolless – one that utilizes a single m2 countersunk screw 10-16mm in lenth (recommended).
This is designed for 3d printing and utilizes no supports and utilizes only 25 grams of filament.
To assemble the case:
1) First, insert the Raspberry Pi 4, insert the corner with the ethernet port first, then set the Pi PCB into the remaining posts.
2) Next, affix the lid starting with the side nearest the eithernet port.
3) Finally, screw in an m2 countersunk screw 10-16mm in length on the underside.
Prints without supports in standard 3d-printing materials like PLA, PETG, etc. You may want to increase perimeters if you want more strength on the "posts" between the USB and ethernet ports.
| Date published | 23/09/2019 |
| Price | $2.99 |
| Tempo per farlo | 180 - Minuti |
| Quantità di filamento | 25 grams |
| Dimensioni | 59mm x 90mm x 23mm |
| Supporto Gratuito | YES |