RECREUS Sneaker
RECREUS Sneaker
3D
Published 2014-03-28T15:07:58+00:00
This design from Ignacio Garcia (Recreus) is inspired by 80s films such as Back to the Future, Starwars & Short Circuit.
The fullsize version pictured was printed by Recreus in Filaflex 1.75mm.
During the months we have investigated and worked hard to develop the 1.75 mm filaflex format. Sneakerbots are the actual proof that shows filaflex works becoming in the most elastic filament on the market. It should be noted that the new design is more comfortables than first one. You can vary the softness changing the percentage of infill. The tongue makes that laces don´t hurt foot. Hope you print them, wear them and be the coolest maker in your city!! - Ignacio Garcia
PRINT SPECS
(Fullsize using Filaflex)
Temperature.......235ºC
Layer height.......0.2mm
Print speed........90mm/s
Infill...................23%
Nozzle...............0,3mm
Printer...............Prusa I3
Extruder............Direct drive
Time.................22 hours
*Our purple 50% scaled version took 4 hour and 43 min's, printed at a layer hight of 0.20mm and 100% infill with temp-colour changing flament. Dimensions are 66 X 56.5 X 142 mm. Flament quantity is 59.8 g.
| Date published | 28/03/2014 |
| Quantità di filamento | 59,8 |
| Dimensioni | 130 X 95 X 275 mm |
| Complessità | Difficult |
3d best-Q tpu .6 nozzle 202 temp 55 bed 22 hrs. I lil small and tight around ankles I'm gonna try to scale it up a bit.