Replacement Frame Brace for PSU, Stiffened - Original Prusa i3 Mk3 & Mk3S Delta PSU
Replacement Frame Brace for PSU, Stiffened - Original Prusa i3 Mk3 & Mk3S Delta PSU
3D
Published 2018-12-17T14:42:13+00:00
***Update - April 10, 2019***
Added a version for the updated side-mounting setup for the new Mk3S with the Delta PSU. Please let me know if you have any issues!
************************
I built the Lack enclosure designed by Prusa (https://www.prusaprinters.org/cheap-simple-3d-printer-enclosure/), and wanted to move my Power Supply outside the enclosure since I would be printing ABS.
But, the replacement frame brace didn't seem like it was enough, and was - quite frankly - boring.
I redesigned the brace with additional ribs, material removal cutouts, and repositioned the main face to give a much stiffer result.
Plus, I think it looks cool, and I got to play with some analysis tools which is always fun.
This is a very easy print; no supports are necessary.
.2 mm layer heights, 3 perimeters, 30% gyroid or cubic infill recommended.
| Date published | 17/12/2018 |
| Supporto Gratuito | YES |