RocketSanta2017_TinkercadChristmas
RocketSanta2017_TinkercadChristmas
3D
Published 2017-12-19T09:47:37+00:00
This object was made in Tinkercad. https://www.tinkercad.com/things/1Z5hufH2neW
I have uploaded version 3, which has the sleigh disassembled and arranged for printing. The idea is it would be assembled with a hot glue gun after printing.
Version 3a has fixes for the seats, the booster rockets, the dashboard, and the windshield frame, all of which printed poorly in the first attempt. The photos of the parts are for version 3 (showing failed seats and rockets in black PLA), and version 3a. For version 3a, the red body was printed on a Robo R2, the gray parts were printed on the MakerBot Replicator.
I printed this object with support "on," which involves considerable cleanup. You can see some of the support in the attached image. This was printed on a MakerBot Replicator (5th Gen) and took a little less than 4 hours.
| Date published | 19/12/2017 |
| Quantità di filamento | 52.33 grams (per MakerBot Replicator) |
| Dimensioni | 149mm x 56mm x 52 mm high |
| Tecnologia | FDM |
| Complessità | Medium |