Sacrament Trays & Cups
Sacrament Trays & Cups
3D
Published 2020-03-28T16:05:13+00:00
These are LDS style sacrament trays with 10, small, 1oz, reusable sacrament cups. I chose 10 to accommodate the Covid-19 quarantine limit of 10 people per group, haha. Each item is printed separately (5 total files). 1-water tray, 1-bread tray, 4-legs, 2-handles, 10-cups. I used clear PETG to give them a crystalline appearance but any filament type will do the trick. Have fun printing and renewing your covenants ;)
I've found the cups are less prone to leak if you use "spirilize" and make the bottom layer "concentric". In Cura go to Special Modes>Spirilize Outer Countour>Check. And Shell>Bottom/Top Pattern>Concentric; Shell>Bottom Pattern Initial Layer>Concentric. The other parts are good to print with normal settings. If you use PETG, be sure the nozzle temp is at 245 for a smooth print. You can also brandish the bottoms of the cups with a hot tool or apply a thin later of clear silicone to insure water tightness.
| Date published | 28/03/2020 |
| Tempo per farlo | 1654 - Minuti |
| Quantità di filamento | 193 grams |
| Dimensioni | 187mm x 110mm x 115mm |