Scrap Mechanic Lift Stand
Scrap Mechanic Lift Stand
3D
Published 2019-05-03T16:20:51+00:00
Need a stand for your Scrap Mechanic prints? Modeled after the in-game version of the lift this really "stands" out... As in game everything starts with the lift making this piece a really great addition to any 3d print wishing to be displayed.
I kept the design as close as possible, one thing I left out was the panel on front of legs at the base. I decided to keep it flat on top due to the nature of 3d prints usually varying when it comes to their base.
If you wish to tip then ^^^^^very appreciated but not expected, having fun doing this!
Thanks for viewing my design and happy printing!
***Edit: I uploaded a version 2 of the individual object to ensure better tolerances for little to no sanding. Will be keeping eye on comments and messages to fix any further problems that occur! Sorry for the inconvenience.
The 4 models that make up the stand are the top, middle, bottom, and legs. All are modeled with .3 - .5mm tolerances to ensure attaching with or without glue will be fine.
I recommend printing all objects by themselves with of course legs being the exception of having 4 all together.
I printed using cura settings that allow auto scaling and had no problems with each part being in relative size to one another allowing for nice fit. If any errors are found please feel free to let me know! Thanks
| Date published | 03/05/2019 |
| Tecnologia | FDM |