AESERA02 – Seraphim: Wall Expansion
$10.00 AESERA02 – Seraphim: Wall Expansion
Published 2021-01-11T11:04:55+00:00
This set of 3d printable terrain is filled with walls to expand your Seraphim marble block dungeons.
The Seraphim line of 3D-printable Angelic terrain will be featured in our World of Aach’yn module series as the home of Heroticus. Heroticus is the most active deity on Aach’yn and his domain is literally “kicking ass” as in he or his angels will show up when there is a good fight about to happen, or if a good fight needs to be happening.
This expansion set includes a variety of decorative walls and corners to enhance your Seraphim layouts.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
Date published | 11/01/2021 |
Price | $10.00 |
Supporto Gratuito | YES |