SpaceNavigator 3D Mouse Storage Box
SpaceNavigator 3D Mouse Storage Box
Published 2014-11-26T14:22:32+00:00
The SpaceNavigator is a 3D mouse created by 3D Connexion. It makes life a whole lot easier when designing in 3D.
This minimalistic storage box will keep your 3D mouse tidy and dust-free. It has an internal walled area for the USB cable to be wrapped around.
The lid incorporates the 3D Connexion logo in such a way to take advantage of some plastics ability to be more transparent the thinner the applied amount of layers. If printed directly to the print-bed without a raft the logo will appear clear and well-defined.
The Case was printed at 0.3MM Resolution with 15% Infill. The Lid was printed at 0.2MM Resolution with 15% Infill. The logo on the lid is optimised for the 0.2MM resolution. Total print time was 8 Hours 30 Minutes.
Date published | 26/11/2014 |
Tempo per farlo | - 510 Minuti |
Quantità di filamento | 110 |
Dimensioni | 100MM x 100MM x 72MM |
Complessità | Very Easy |
Supporto Gratuito | YES |