Spool Holder for 3D Printing Nerd's RGB Filament Wall
Spool Holder for 3D Printing Nerd's RGB Filament Wall
Published 2018-07-16T12:12:14+00:00
Well Joel here is my design challenge entry. With this busy life I found the time to model this bad boy in an hour and do a test with 2 little prototype prints before the real size.
I've designed it to be one single print requiring no supports and optimized for FDM printing strength. Little branding never hurt anyone so you got your logo on there, Matterhackers and MyMiniFactory too.
Spool holder fits spool widths no more then 80mm which I think most 1kg spools fit with those specs. I don't have any 2 or 3kg spools so not really sure what the dimensions would be and or if the little shelve would hold hanging off the front like that.
No Supports Required
Printed at 10% infill plenty strong but you pick !!!
Printed with 3 perimeters and 3 top and bottom
Print times will vary but I printed at 60mm/s infill and 50mm/s perimeters
Date published | 16/07/2018 |
Tempo per farlo | 257 - 300 Minuti |
Quantità di filamento | 20m |
Dimensioni | 150mmw x 120mmh x 90mmd |
Supporto Gratuito | YES |