KS1SOS10 - Baba Yaga
$5.00 KS1SOS10 - Baba Yaga
3D
Published 2020-12-30T11:44:16+00:00
From Aether Studios comes the Swamp of Sorrows 3d printable terrain and miniature sets. This set includes the Baba Yaga miniature and chicken-legged hut. All models print without supports. Additional information and resources can be found in the ReadMe.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: Brim helpful on small items
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35%% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: Brim helpful on small items
| Date published | 30/12/2020 |
| Price | $5.00 |
| Supporto Gratuito | YES |
Beggars Brew Nasos Maloudis made this... beauty? Well it is in the eye of the beholder ;) Windy Loved painting this!