KS1SOS28 - Scatter Trees
$5.00 KS1SOS28 - Scatter Trees
Published 2021-04-16T14:57:20+00:00
This particular Set, Scatter Trees, was built for you to utilize on your tabletop where ever you see fit. These 10 scatter models make it easy to set on top of existing tiles or even on top of digital maps. We hope you enjoy all the Swamp of Sorrow sets!
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35%% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
Date published | 16/04/2021 |
Price | $5.00 |
Supporto Gratuito | YES |