The Drone Grad Cap
The Drone Grad Cap
3D
Published 2018-10-06T07:42:13+00:00
Introducing the drone graduation cap! I developed these parts to fit onto most standard grad caps. The drone successfully flew flawlessly at a graduation and it was an epic hit!
The Drone has 4 swiveling arms that conveniently swivel outward for flight and back in for conservation of space.
See it in flight! : https://www.instagram.com/p/Bkd7LKunk-b/?utm_source=ig_share_sheet&igshid=zeejwqubgx3y
Here are the items you'll need to assemble this project :
Heres the BOM
Naze32 rev6 flight controller
fs-ia6b receiver
fs-i6 rc transmitter
3s 1300 mah lipo
4 in 1 esc
hookup wire
Other for assembly
M3 hex screws and hex screwdriver
#8-32 x 1/2 in everbilt machine screws
Soldering iron and solder
Hot glue gun
wirecutters
P.s:
i recommend lasercutting the drone arms as they'll be far more robust.
Use glue or the tip of a soldering iron to join the two arm joint halves together.
Print all parts 60-100% infill for strong parts.
| Date published | 06/10/2018 |