The Flowing Lampshade
The Flowing Lampshade
3D
Published 2020-04-21T19:28:10+00:00
The ‘Flowing Lampshade’ is the first of three in the ‘Dynamic Twist’ collection. This collection focused on showing the abilities of 3D printing to print complexed forms with overhangs to create dynamic forms that could not have been created with any traditional mass manufacture method in one piece.
This product has been designed for an E27 lampholder [40mm Diameter] if you can't find one of those let us know and we can supply you with an adapter plate/alter the design.
We printed this design with pearl white PLA [Ultimaker].
We have tested this product for two months with a 13W light bulb and there has been no deformation of the PLA. If you use PLA we wouldn't recommend going much higher than this because of the mostly enclosed design.
To print this design we used an Ultimaker 2+ 3D printer and the print in the photos is printed with a 0.6 mm nozzle [you can also use 0.25mm, 0.4mm +0.8mm].
We would love to see your prints!
Follow us!
F: facebook.com/3dppa
I: @3dprintproject.athens
Resolution: 0.1mm - 0.3mm [0.3mm shown with fuzzy skin slicer setting setting]
Infill: 0%
Brim: Not strictly required but use if you have issues with bed adhesion.
Support: No
Raft: No
| Date published | 21/04/2020 |
| Tempo per farlo | 14 - 15 Minuti |
| Quantità di filamento | 212g |
| Dimensioni | 191mm x 215mm x 182mm |
| Supporto Gratuito | YES |
