the Roman Doric Columns
$4.00 the Roman Doric Columns
3D
Published 2020-06-19T06:50:12+00:00
This 3D models are the Roman Doric Order Columns.
It consists of a capital and shaft.
Except for joining clamp part(Related : Empolia-Pole), the column is designed according to historical research.
and it is designed in three versions, 7, 8, 9 diameter.
8 times diameter version is the most consistent with historical research.
The total height of column is 162mm and is compatible with the architectural series released by bluesand.
hope you like it :)
[Note]
As of May 10, 2023, two 3d models for resin printers have been added.
- [100mm] Roman Doric Column 8D.stl
- [100mm] Roman Doric Column 8D without drums.stl
You can freely adjust the scale of the column.
the quality of this product is maintained until it is scaled down to 50%, but less than that cannot be guaranteed.
[Update Note]
- 01/11/2021
3D models have been redesigned according to historical evidence
Separating existing models according to architectural order (roman doric / tuscan)
Added new diameter version (9D)
joining part has been changed to X-clamp.
- 03/18/2021
Add "100mm height version of Roman Doric 7D column STL files and 7mm 1.1t X-clamp STL file"
* For the 100mm height version, please use the 7mm X-clamp and glue
- 10/19/2021
We have added a discount code for buyers of this product.
This discount code can be used to purchase 'Doric Order Monument'.
To check the discount code, please refer to 'post-purchase information' on the product purchase page.
- 5/10/2023
Add "[100mm] Roman Doric Column.zip"
Note : Production video
1. Minimal support
2. It requires assembly with a glue or x-clamp(included in the product)
3. FDM 3d printer recommended
4. PLA filament recommended
5. Required build volume : at least 40mm x 40mm x 144mm
| Date published | 19/06/2020 |
| Price | $4.00 |
| Quantità di filamento | 55g |