Titan Aero V6/ Volcano mount/part cooling for Creality and MGN12H linear rail printers. EZABL/BLTouch
Titan Aero V6/ Volcano mount/part cooling for Creality and MGN12H linear rail printers. EZABL/BLTouch
3D
Published 2018-12-10T16:46:18+00:00
This is a proven mount and part cooling solution for the Titan Aero and Creality 3D printers that utilise the standard X carriage.
Files are included for ducts to suit both standard and pancake stepper motors, and also for both standard V6 and Volcano heater blocks.
All parts print with no support. Please see the images for part orientation.
The duct is height adjustable, and a cable management pylon is integrated for effective strain relief. There is sufficient space between the 5015 part cooling blower and the back of the pancake stepper for a 11mm heatsink, but in my experience the stepper barely gets warm.
Total weight for the pancake stepper version is 400g complete with X carriage and rollers, compared to 260g for a lightweight V6 Bowden set up.
2/2/19: V2 of the duct has now been uploaded incorporating CFD optimised nozzle geometry. The mount remains unchanged. All four varients in both V1 and V2 are listed.
22/2/19: A Beta test MGN12H mount for linear rails has been added.
| Date published | 10/12/2018 |
| Tecnologia | FDM |
| Complessità | Easy |
| Supporto Gratuito | YES |