Twist Drill Bit Handle Upsize Adapter
Twist Drill Bit Handle Upsize Adapter
3D
Published 2021-03-01T11:07:56+00:00
With this adapter you can grip the drivers stronger. It could be for tightening smaller bits better or overall more strength when applying a force. I'd recommend plane-cutting with your slicer and printing a small ring for test first before deciding on what % scale up/down fits your handle.
You can use the calculator here to input the current size, desired size and required % scale
https://docs.google.com/spreadsheets/d/1zJlbit_jOXq7NhQWwnG7wl3nAqoBnDD0Xl6MfaueqgA/edit#gid=0
Adding the STEP file in case you want to adjust the thickness as well. Current design assumes handle size outer diameter is 10.20 mm and print inner bore diameter is 10.30, leaving 0.10 mm for fit tolerance. I had to knock this in with a mallet and I prefer this to be a tight fit, so it won't turn as I apply force to twist the bit.
See my instagram for the video https://www.instagram.com/p/CLylZWwjsCg/
Printing tips:
Bottom of the object has a tiny chamfer, print it standing upright on that side with a 3-4mm brim, should be fine.
| Date published | 01/03/2021 |
| Supporto Gratuito | YES |
