USB_Holder_Arc-Reactor
USB_Holder_Arc-Reactor
3D
Published 2020-05-22T16:31:11+00:00
After design and print my first USB holder, I imagine it like the Arc Reactor. So I modify the model and get this design. It's a ten standar USB holder.
There are two parts, first one, the base of the Holder and the second just a kind of insert for decoration. I print the base in Silver PLA and Insert in True Grey. Try any combination.
Printed at 60mm/s Print Speed. Consider just a feew lines of wall, I use 0.8, so that gives you between inner and out wall a total of 1.6mm. Four layers for Top and Buttom. Infill at 20% with ZigZag Pattern.
Didn't use support for body.
For the Tap Zig Zag support, 45° infill line direction and 10% Support Density.
-Cura Slicer -Nozzle temp 205°
-0.4 Hardend Nozzle
-Bed Tempt 60°
-CMagnet Plate
| Date published | 22/05/2020 |
| Tempo per farlo | 290 - 340 Minuti |
| Quantità di filamento | 52 |
| Dimensioni | 98mmx98mmx36mm |
| Supporto Gratuito | YES |