Watch Case - 3D Printed Build


Watch Case - 3D Printed Build
Published 2017-08-08T22:57:48+00:00
This build is an easy project that adds a little style to your watch collection. This is a simple 2 watch design using simple components and 3D printed parts. The cost is roughly $25 in components and it takes about 17 or so hours to print.
Full build instructions are available here.
Check out my profile for all my designs or consider subscribing to my email list here to stay updated with new builds, tutorials, and designs.
Watch Case (decent surface quality to limit amount of sanding needed)
• Filament choice not really important
• 0.2mm layer height
• 25-30% infill (ideally you use multiple processes and use 100% infill for at least the first
10mm if you can)
• Support is optional depending on overhang performance • Brim optional
Cover and Cover Back Plate (decent surface quality to limit amount of sanding needed)
Filament choice not really important
0.2mm or higher layer height
15-20% infill
Support recommended
Brim optional
Date published | 08/08/2017 |
Tempo per farlo | 930 - 1020 Minuti |