Wheel Bushing for Husqvarna HU700H Push Lawn Mower
Wheel Bushing for Husqvarna HU700H Push Lawn Mower
Published 2019-12-13T08:45:12+00:00
So, in my continuing line of "no one else will ever need this" crap, I present to you the front wheel bushing set for a Husqvarna HU700H push mower, part number 532439077 (#85 on the diagram, called BRACKET.FRT.AXLE.SUPPORT by the manufacturer). You will need one set for each side. There is only one screw holding this bracket in place - even the diagram only shows one screw per side - but I would highly suggest using a second screw on the other side. The holes are already there, so it just makes sense to screw both pieces.
This prints best in the orientation presented - with supports enabled - and I would recommend a durable material. I used PETG, but maybe even carbon fiber would be good/better? You may want to carefully drill out the screw hole just to make it round since at 0.2mm they don't come out perfectly round. Just don't enlarge it any. I recommend at least 1.6mm walls (4 wall using a 0.4mm nozzle) and a high infill - I used 70% triangle infill.
Date published | 13/12/2019 |