Working model of the turbocharger
6,636
views
783
downloads
2
collections
7 comments
Loading comments... 
Working model of the turbocharger
3D
Published 2019-07-03T17:42:30+00:00
67
7
Add to Collection
Description
Neat Assembly provides a sample performance. For acceptable work requires a small run-in with a compressor or vacuum cleaner. Care must be taken when using the compressor, and dynamic injuries may occur due to the destruction of the impellers if excessive pressure is applied.
Printing Details
The diameter of the bearing beds are increased to compensate for the shrinkage of the print by 0.3 mm. The impeller Holes require drilling by 3 mm. The dimensions Of the bearings are 7x3x3 = 2 PCs. Has a bolt head in flush М3х10 = 6 PCs, М6х20=12 PCs. As the axis used roller 3~40 mm needle bearing. Between the impeller and the bearing strip thickness 0,2 - 0,4 mm
Technical Information
| Date published | 03/07/2019 |
More Information
Object Parts