X-Carriage MBN12H+BMG
3,330
views
33
downloads
0 comments
Loading comments... 
X-Carriage MBN12H+BMG
3D
Published 2020-05-14T14:54:06+00:00 • Remixed from MGN12H G5 Precision Piezo Grove mount X-carriage
2
0
Add to Collection
Description
Adapted the X-carriage so it can house BMG extruder + motor instead of G5
Still using PP but you can attach extruder directly to BMG if you like.
If you are not using PP, there is a mount point for BLTouch
BLTouch X offset = 0
BLTouch Y offset = -25mm
Print requires support.
Source: https://a360.co/361cvDj
Hosted on thingiverse too: https://www.thingiverse.com/thing:4356356
INSTALLATION:
- attach your extruder to the precision piezo mount (e.g. part https://www.thingiverse.com/thing:3122283 or https://www.thingiverse.com/thing:3456684 or similar)
- attach now extruder + piezo mount to the x-carriage, rotate the extruder heatbreak fan towards the back of the assembly
- attach X-carriage to your MGN12H rail. First fingertighten back 2 screws (the easily accessible ones), then fingertighten the remaining 2 screws using ball end allen key. Finally slide the X-carriage back until your fan barely touches the rail and fully tighten all 4 screws - M3x8mm ideal size
- attach BMG + motor (M3x38mm ideal size)
- attach 2 blowers
- attach part cooling fan tips ( you can find bunch of them here: https://www.thingiverse.com/thing:4189461/files )
print :)
Licenza
Printing Details
I printed in ABS 0.4mm nozzle, 0.20 mm layer, 2x layer separation for support, 10top, 10bottom, 10 perimeters, 50% infill.
Technical Information
| Date published | 14/05/2020 |
More Information
Object Parts
Remixed from
