Yin & Yang Echo Dot and Google home holder
$5.00 Yin & Yang Echo Dot and Google home holder
3D
Published 2018-11-19T16:18:13+00:00
This flat organiser idea came about with my interest in AI and how both my echodots and google home are always just lying around. I thought it would be cool for them to keep each other company for the yin and yang to balance their qi. power. (sorry Siri)
With the success of my yin & yang nut bowl, i thought this would be useful for just one or both devices. I added a hole feature for the cables and thought about putting them through the centre spin however this would make the design larger.
My Cr10mini was only able to print at 75% of size so the google home does not fit in this pick but the stl file is the full version. i test printed using the Creozone wood pla which I which they had darker versions. If they could add a more imperfect look to the wood it would look cool.
Settings I believe I just used the recommended and it came out fine. 200 nozzle and 60bed. 0.2mm about 10 hours.
I am new to fusion 360 so I know there are some errors in the sketch constraints which I can't seem to work out, like linking the arc to the inner circle. This meant I could not fillet one or two edges which was frustrating. Would love help from anyone on this.
| Date published | 19/11/2018 |
| Price | $5.00 |
| Tempo per farlo | - 12 Minuti |
| Quantità di filamento | 130 |
| Dimensioni | 230 x 230 x 30 |
| Supporto Gratuito | YES |