Zel's Perfect (ly Ridiculous) Pen and Tool Holder
Zel's Perfect (ly Ridiculous) Pen and Tool Holder
3D
Published 2019-12-18T08:40:12+00:00
So the story goes, I was in the shop one night working on a project and needed to use a certain Sharpie several times. I was tired and a bit irratable that day. Having to dig through the standard plasic cup pen holder to find the specific sharpie, after the 6th or 7th, upset me.
This pen holder was the result. there are 25 13mm rounded square holes to seperate out your pens or tools. These holes are large enough to accomodate Standard sharpie type markers and as a bonus other things fit well too, Pliers, tweezers, pics and other tools.
Do be aware, this file takes a long, long time to print. With a .4 nozzle, .2 layer height with 3 walls it will take around 20 hrs. People seem to love it though, I have printed around 50 of them with varous logos on the sides with a .6mm nozzle, .25 layer height and 2 walls, these take about 10 hrs. the one in the pics is from the .6mm nozzle
If you decide to print this ridiculous pen holder please upload a photo so we can all share in our OCDness and see your cool and ridiculous prints!
Will print with any resonable nozzle size, I use a .6mm, .25 layers and 2 walls. prints take ~10hrs with a direct drive printer.
.4mm nozzle, .2 layers and 3 walls will double the time.
I'm not sure how a bowden set up will effect the time, if you print on a bowden printer please leave a comment with time!
| Date published | 18/12/2019 |
| Quantità di filamento | 220.4 g |
| Dimensioni | 83x83x73 |
| Supporto Gratuito | YES |
