RC Plane STand
11,494
views
815
downloads
10
collections
0 comments
Loading comments...
RC Plane STand
3D
Published 2019-10-15T14:44:49+00:00
80
0
Add to Collection
Description
Simple but solid stand for rc models.
Print settings:
All parts except belka.stl:
layer height: 0.2 mm
top/bottom layers: 3
outline/perimeter shells: 3
infill: 20%
belka.stl
layer height: 0.2 mm
top/bottom layers: 4
outline/perimeter shells: 4
infill: 50%
Supports are needed for parts: pokretlom.stl and pokretlod.stl
In addition to the printed parts you will also need:
6x M6 carriage bolt 30mm long
4x M6 carriage bolt 20mm long
10x M6 nut
2x 32mm (1 1/4 inch) outer diameter PVC tube 50cm long
thin sheet of foam rubber (from old mouse pad)
License
Technical Information
Date published | 15/10/2019 |
More Information
Object Parts
Lovely plane stand. It is bigger than I thought. Just what I needed. Thank you. Even had some fitting bamboo in the cellar.