0.9" 2-Piece Glue-On Wheels, Low Offset
0.9" 2-Piece Glue-On Wheels, Low Offset
3D
Published 2021-10-18T16:19:38+00:00
2-piece, glue-on wheel designed for use with the SCX24. There are three offset options. For reference, the +1mm offset is 2mm closer to the center of the axle compared to the RGT and CR-18/24 0.9" wheels. The 0 and -1 sit further outboard. These wheels mount directly to the axle pin. They DO NOT use wheel hexes. They may fit other models like the CR-24, CR-18, and RGT Adventurer. In my testing with 46mm RGT tires, no glue was necessary and there was no slipping. YMMV.
Hardware (per wheel):
-1 Offset: (12) M1.4 x 4mm
0 Offset: (12) M1.4 x 6mm
+1 Offset: (12) M1.4 x 6mm
Tested to work with the stock SCX24 steering knuckles. The +1 offset will not work with brass steering knuckles, but the other two may. Clearance is tight.
PETG or PLA
Print the face oriented outside-down
Print the barrel oriented outside-up
Supports needed for the barrel. No support for the face.
Brim recommended
| Date published | 18/10/2021 |