Youtube, Tesla, Tik tok, Disk brake, The Mandalorian, Pokeball, I love you, Among us, Like, Batman

10 quick-print discs with different logos, designed for the Smartphone holder keychain

The keychain and other discs are free to download , Here!!..

https://www.myminifactory.com/es/object/3d-print-144690

The discs have a diameter of 35 mm and a thickness of 1.6 to 2.8 mm.
If you use the colors of the photos you can print different logos at the same time, it will be more fun (see image “ DISK-COLOUR-HEIGHT ” )
It is recommended to print with a resolution of 0.1 or 0.12 mm.

The number of layers for color change will vary depending on the chosen resolution. In the image "LAYER HEIGHT", there is a table with the layer number for the color change of different heights, both 0.1 and 0.12 mm resolution, I hope it helps you.
For 0.12mm resolution The values vary depending on the laminator used, but are functional.

Example. I'm going to print the file batman.stl; 0 to 1 mm is Yellow and 1 to 1.6 mm is black; with 0.12mm resolution, the color change will be done on layer 9

”“ Script for simplify 3D :

{REPLACE "; layer 9, Z = " "\nG91\nG1 E-5 Z20 X60 F5000\nG90\nM0\n; layer 9, Z = "}

Replace layer 9 with the layer number where the color changes (It will depend on the chosen resolution)””

I print using octoprint, the screens of my printers do not accept the m600 command to do the color change 

If you liked it, put photos of your printed models, it is a way to reward my work, thank you