Universal Ceiling hood lamp mount
Universal Ceiling hood lamp mount
Published 2020-02-16T13:25:12+00:00
Hi, this is some sort of a universal hood lamp ceiling mount. I've designed it to be printed without problems in pla(any material will be ok). it is composed by 3 main parts, the central pipe, that i've made in hexagonal shape, but you can make it in any other shape according to the hood, the wings(my case has 3 wings every 120 degrees to fit the hood) and the clip, for fixing the hood to the support. the height is 100mm from the top, because my hood has rods 5 centimeters under the top part, so i leave a 5 cm gap between the ceiling and the hood. wings are strong enough to hold a 60w LED power supply.
soon i will make a support for a white plexyglass that covers the bottom of the hood .
I'm sorry for My english, i'm still working on it.
Printed in PLA, 0.28 quality and infill 20% (may be more dense, if you have a hood that weights a lot) every ridgid material will be ok, no support no adhesion. the orientation is ok. for mine i have printed 3 wings, a pipe and 6 clips. wings have to be glued to the central pipe with some super glue or whatever you want, theare are a hole in each wing to be fixed to the ceiling.
Date published | 16/02/2020 |
Time to do | 5 - 8 minutes |
Support Free | YES |