Ender 3 Spring Feet Vibartion Damper
Ender 3 Spring Feet Vibartion Damper
3D
Published 2020-02-22T23:40:13+00:00
Welcome to my first Thing!
These are vibration dampers for the Creality Ender 3 and Ender 3 Pro!
They require 8 - 5mm x 25mm x 10mm springs, commonly found on amazon etc.
5mm = inner diameter (not important as long as it does not exceed 10mm)
10mm = outer diameter
25mm = length
You need to print 2 files 2 times (as their name already suggests)
and the bottom parts (1 file) 4 times
Optional: TPU Inserst for the underside of the lower half
Since I printed them with 0.28 layer height they are not looking perfect on my pictures.
I am certain that this solution will be a more permanent solution in contrast to the other virbation dampers made out of pure PLA (they will crack after a few months).
They are working flawlessly for a while now after some tuning (placing some cardboard in the holes of the feet so they have enough pressure and therefore don't make noise)
Feel free to remix them and have fun!
printed in pla but anything hard enough works just fine
| Date published | 22/02/2020 |