Shelfsupport for KAD Big Holder
Shelfsupport for KAD Big Holder
3D
Published 2020-03-06T17:50:17+00:00 • Remixed from KAD universal holders
This adds a support backplate to the Big Base Outdoor holder.
This is adapted to 18mm shelf (sits flush on top). but will mount fine as long as the top screws will go into the shelf.
The Baseplate is unmodified from original.
The backplate have 2.5mm holes in the bottom, a 3x15mm woodscrew joins the front and back plates.
You may need to drill your holes to 2.5mm depending on your printer.
The top two screws will depend on the shelf.
I have 3x15mm flathead woodscrews in all 4 holes.
UPDATED 20-03-08; Made the back support flat instead of pointy.
Both work, updated version might print better. Included stl and fusion360 for v6
I print 3 walls, 15% and PLA.
| Date published | 06/03/2020 |
| Material Quantity | Around 25g |
| Support Free | YES |