Octobox V2 Improved Lid
Octobox V2 Improved Lid
3D
Published 2020-08-25T05:00:11+00:00
An improved lid for the Octobox V2 design. I intended to make this a while ago but forgot until it was suggested to me. This improved design moves the screws originally visible on top of the box to the underside of the lid. They were visible on the original design as it was my first design which used screws, and I had not yet figured how to hide them.
I have also taken the opportunity to add updated patterns, including the 'mech' design which produces a framework type appearance (as used on the Octo-iris box shown as well).
Simply print and assemble these doors in place of the original ones. They are also cross compatible with the 'Octo-Iris Box'.
The multi-material designs were achieved by doing a material swap at the appropriate height (2.6mm).
For the '(dec)' versions of the bottom door, the wall thickness becomes quite thin around the outer screw hole (0.5mm) and may cause printing artifacts there although mine printed fine.
| Date published | 25/08/2020 |
| Dimensions | 80x80 |
| Support Free | YES |