Slim Stratux Case
Slim Stratux Case
Published 2021-07-02T08:45:14+00:00
I made my own case to assemble the Stratux kit.
The idea is to keep the antennas in place, but occupying the smallest area.
I'm using 1 fan (30x30x7mm), it came with several screws and nuts and I'm using 10 screws and 8 nuts.
4 screws and 4 nuts to hold the fan. I'm actually using 3 because the 4th would hit the AHRS module, but I uploaded a new version with this problem fixed.
2 screws and 2 nuts to hold the Raspberry Pi in place (check the pictures)
The other 4 screws and 2 nuts are used to put the 2 parts together.
Besides that you will need all the parts required to build the Stratux, plus the suction cup holder (you might use a different king, but maybe you need to make some adjustments)
And finally, if you want to print the GPS shield (it's optional), you will need some copper tape to cover it.
=====
If you'd like to support me you can post a make, comment and/or pay me a coffee at PayPal
Date published | 02/07/2021 |
Fits Rpi4 with little knife work on HDMIs.