This is a replacement plate for the 2008 Dodge Grand Caravan Steering wheel. There are 3 basic designs. One with just the Rams head. One with the Rams head and Dodge text ( requires a nozzle smaller then I have, .2mm or .3mm because the text is so small). Finally a Blank plate for anyone that wishes to to customize there own special plate. Because of the diversity of people using these files I have included 3 different formats. All three fit the shape perfectly and the pins are located to provide resistance on the holes for a snug fit. No adhesive is needed to hold the plate in place nut a little tack glue or thin double sided tape won't hurt.

-First is the complete plate but you will need to add supports ( I have found the pins to be quite easily broken off but careful gluing them to the original location makes them quite soild.

-Second is a plate with suports I added using MeshMixer which clean off reasonably easy ( one note: because of the print orientation the pins easily break free and need to be carefully glued back into thier printed location).

-The third version came about because the pins are so easily broken off. So this version has pins that are printed separately then glued into the holes provided on the back of the plate. The plate is printed flat so the desgin printed come out the best and the plate is strong. The pins have a flat side for printing them horizontally for strength. If you choose this version print the plate of your choosing then add 3 pins to your build and print away.

I hope someone can find this useful.