P802MA Upgrades by Netoobuntu
P802MA Upgrades by Netoobuntu
3D
Published 2017-03-06T10:50:49+00:00
Hi,
I will post here all my modifications made to my Tronxy P802 MA (P802MA). You will probably need a Dremel Tool to enlarge a little holes for bearings & stems !
1 - bottom_z_axis_bearing_block_rescaled_P802MA.stl :
This is a bottom bearing block, originally made by @rizer and modified by me, for the P802MA printer. This part must be printed twice (one for the left Z motor side and one for the right Z motor side).
Bearing used must be 22mm outer diameter (i used 608ZZ bearing).
2 - top_z_axis_bearing_block_left_P802MA.stl :
This is the top bearing block made by me (design in progress) for the left side. Use symmetry to print the right side. The bearings used are the same as the bottom part (608ZZ).
| Date published | 06/03/2017 |
| Time to do | 20 - 40 minutes |
| Technology | FDM |
| Complexity | Medium |
| Support Free | YES |