30 Inch Snake, Print In Place, Basilisk, Boa, Python, Articulating Flexi Wiggle Pet
$4.08 30 Inch Snake, Print In Place, Basilisk, Boa, Python, Articulating Flexi Wiggle Pet
Published 2022-05-30T14:35:19+00:00
This 30 inch, print-in-place Snake is such an EASY print and a really FUN design! Prints great in PLA with no supports! It is strong and durable when finished (even my toddlers can't break it!).
Hi, I'm Tracy! Veteran, full-time mom, and entrepreneur at heart! I love creating unique and fun designs! Please message me for suggestions!!
Please READ the following::
This design (like all Cinderwing3D designs) is under copyright. Which means, upon purchase, you do not have the right to sell commercially.
If you would like to legally sell them commercially, please follow my Patreon link and subscribe to the tier for commercial resale.
The Digital files are never to be re-sold, shared, or given away
Thank you for your honesty and support!
ALL PUBLIC CINDERWING3D FILES:
https://cults3d.com/en/users/Cinderwing3D/creations
- Crystal Dragon
- Rose Dragon
- Woodland Dragon
- Void Sea Dragon
- Flying Serpent
- Clover Dragon
- Easter Dragon
- Crystal Wall Mount Dragon Stand
- Sugar Cube Gliders
- Jellyfish Dragon
ADDITIONAL CINDERWING3D FILES ON PATREON ONLY:
https://www.patreon.com/cinderwing3d
- Void Octopus
- Coral Reef Dragon
- Baby Crystal Dragon
- Baby Rose Dragon
- Baby Woodland Dragon
- Baby Flying Serpent
- Baby Void Sea Dragon
- Baby Clover Dragon
- Baby Easter Dragon
*Please share images of your creations! I would love to see them! :)
Below settings are for durability for my kids, you can try going lighter on anything. :)
Specifics (using Simplify3D):
- Takes up the entire print bed, as big as I could make it!
- Prints great in PLA with no supports!
- I suggest printing with a raft
(Raft top layers 3, raft base layers 2, raft offset from part 4.00mm, separation distance .14mm, raft top infill 100%, above raft speed 30%)
- Suggested wall thickness: 7
- Primary layer height: 0.2mm
- Suggested infill density: 65%
- Costs $8.43 to print, based on a $30 reel
- Takes 31 hrs 15 mins
- Head is semi-hollowed out for weight balancing out with the body and reduced printing costs
- Body sections designed with (micro-gap) for stronger inner support
| Date published | 30/05/2022 |
| Price | $4.08 |
| Dimensions | 220mm x 220mm x 37 mm |
| Support Free | YES |
