Wall mount for Samsung screen
Wall mount for Samsung screen
3D
Published 2019-08-27T15:53:12+00:00
I've needed a wall mount for my PC screen to safe some space on my relatively small desk. (can a desk be big enough? ;) )
So I created these objects, first the actual mount for the display but after i printed it seccesfully i noticed that i need a little angle to work pleasurable with it. So i created a second part, the angle-part. You can srew them togehter on the wall, and have a approximately 15° angle.
THIS IS A TEST. ITS MY FIRST OBJECT UPLOADED ON MYMINIACTORY. SO, SORRY FOR ANY ERRORS OR BUGS.
If you print it with the crewholes on the printingbed you dont need any support. I added in cura the experimental treesupport to get a smoother hole for the display.
I printed it with .3 mm layerhight, 80mm/s, 1.3mm wallthickness and 50% infill. I guess you can print it also with 0.8 mm and 30% infill. The part i printed is REALLY strong, no chance that it breaks only from the weight of the display.
| Date published | 27/08/2019 |
| Time to do | 5 - 7 minutes |
| Material Quantity | 145 |
| Support Free | YES |