*update: added logi c270hd mount (logi-mount-v2)*
on logi c270hd all the stand parts need to be removed. then the logi-mount-v2 mounts to the camera body with M3x30 (i think) screw.
rest fits same as raspi cam.
simple to print, simple to use.
sturdy design, no flexing or warping.
Based on a prototype i had for a while in function and it shares design and parts from prusa challenge design ( https://www.myminifactory.com/object/3d-print-83141 ).
i used large paper clip to mount it above x motor cover. that way it's easy to move it or remove it when it's not needed.
All parts can be connected together usiing M3x25mm screws and nuts (4 or 5 in total). there is a screw hole to hold camera but i just used couple of layers of painters tape to add friction to it so it's easy to slide camera left or right and it doesn't slide on it's own.
once fitted adjust your location, angle and distance of the pi cam and enjoy your cool timelapses.
*There's possibility to mount different web camera but i don't use one so please feel free to contact me for the fusion file of the camera bar mount part, or let me know how your camera mounts and i could work on the adapter.
it's possible to print most parts without supports (cam back case needs supports for the small portion of the print).