Albus Dumbledore Bust printed on Dimension Delta 3D Printer. INVENTIVE 3D - "GIVING 3RD DIMENSION TO YOUR DREAMS" CONTACT US AT: Mr Mohit Sakhpara : +91 8866101225 Mr Jeval Dholakiya: +91 8000136060 Email ID: inventive3d@gmail.com Facebook: www.facebook.com/inventive3d Twitter: @3dinventive

Printed on Sindoh 3DWox at 50 microns, 46 hour print time, 15% infill.

Printed at a 20% infill @ 0.1 mm layer height with no support. Great Model! Printed several. They make great gifts for people who are potterheads such as myself.

Printed around 200% larger with 10% infill, 0.1 layer height and no supports . Base was removed after printing to fit on surface where it is to be displayed. Needed to be patched after printing. Thinking this was due to the scale increase and should print perfect at the base scale. Light sanding followed by primer and passes of a Stainless Steel and metallic gold spray paint. Details were painted with a dry brush pass with a brass rub n buff and finished with a black acrylic wash.

10% infill 3.0 resolution

Printed by 86Duino Enjoy.

Printed in 3DE Premium Snow White Ceramic and smoothed with IPA

Printed on a Tevo Little Monster using the following parameters: Material: ABS Nozzle size: 0.4 Layer heigh: 0.2 Infill: 10% Supports: NO Nozzle temperature: 230°C Bed temperature: 90°C Cooling: Off Speed: 60mm/s

Awesome model , thank you.

This was an awesome print. I used a Copper Metal filament to print this amazing Dumbledore. Your design was fantastic. Please make more Harry Potter characters haha.

Awesome design! Printed at 200% scale (took about 24 hours to complete). Here's a video of the printing process: http://youtu.be/0AXZDMDRedg

Silver ran out through the print :(

scale the model to 80mm. layer height 0.08 mm. PLA bronze colour at 190degree speed 60 mm/s, travel speed 100 mm/s ,retract distance 5 mm. , retract speed 50 mm/s www.bb-ocean.com

We printed these on the Library's PolyPrinter 229.

My second ever print using my Creality Ender 3 and it came out amazing. I got Ziro marble PLA specifically for this bust and I'm very glad I did. Its a great model and was very easy to print using Cura's stock profile (for the CR10 but with a smaller bed since I had the Ender 3) Thanks so much for uploading this!

Print on FLSUN QQ with 3deksperten Filament PLA Copper Silky

Great model! Printed in Gray eSun PLA+

Bronze PLA. Great model, thank you.

My second print ever. I'd say it came out really good. Thanks for the model, my daughter loves it.

10% in fil 0,1 très réaliste :)

Wonderful sculpt. you've really captured Richard Harris!

Nozzle 0.4, layer height 0.1.

Printed 0.16 layer 10%infill 4walls took 10hrs

Scaled to 166%, Printed @ 0.16mm on Colido3d Grey. Base custom infill at 50% with remaining at only 5%, using 1.76mm walls (32 hours 40 mins). Airbrushed

Great design! I printed him a few months ago in grey PLA and finally decided to paint him recently. Turned out pretty cool.

Great model! Printed on Ender 3 in PLA Gembird gold filament. (0,1 layer height)

Printed at 0.12mm in Gizmo Dorks marble PLA. It's a great likeness and it printed quite well. I made use of Cura's tree supports which made for good support of the nose and a couple other parts, without leaving anything to clean up.

Très bon print. Merci. Fait en 30cm de haut.