Anet A6 Hand Held Controller Enclosure
Anet A6 Hand Held Controller Enclosure
Published 2019-07-22T14:12:22+00:00
Go to my newer presentation at:https://www.designuitinspiratie.nl/anet-a6-display-behuizing/.
This is on my personal website :-). Choose your language at the top right corner of the page.
---------------------------------------------------------------------------------------------------------------
This is an Hand Held Enclosure for the Anet A6 Printer display (12864). For the back I made two types (display case partB.stl & display case partB closed.stl: one with, and one without a cutout slot for the leads sticking out of the back of the PCB. If you print the one without the cutout, you also need to cut these leads shorter to make the back (display case partB closed.stl) fit. If you don't want to cut these leads “ display case partB.stl” should fit.
Other parts used are: 4 M3x20mm bolts and 4 M3 nuts.
If you have questions or think I forgot something, feel free to ask :-)
tested on a FDM Printer with 0.4mm Nozzle at 0.2mm resolution in black PLA & Silver ABS
| Date published | 22/07/2019 |
| Dimensions | 87mm x 144mm x 23mm |
| Support Free | YES |