Anfasgerät 16-63 mm für PP / PE Rohre - Chamfer Tool for 16-63 mm Plastic Pipe
Anfasgerät 16-63 mm für PP / PE Rohre - Chamfer Tool for 16-63 mm Plastic Pipe
Published 2020-04-21T19:22:06+00:00
Anfasgerät 16-63 mm für PP / PE Rohre V2
Ich brauchte ein Anfasgerät für zwei Fittings und wollte keins kaufen, also habe ich mir eins entworfen.
Die Klinge wird mit M2.5 Schrauben gehalten, die Gewinde sind schon enthalten und funktionieren bei meinem Drucker perfekt. Falls keine M2.5 Schrauben zur Hand sind, einfach ein grösseres Gewinde reinschneiden.
Update 2020-04-26
- Klingen Winkel verbessert
- Klinge kann jetzt in der Einschnitttiefe justiert werden
Man benötigt:
1x Trapezklinge
1x M8 x 30-50 Sechskant Schraube
1x M8 Unterlegscheibe
1x M8 Mutter
2x M2.5 x 5-10 Schraube
2x M2.5 - M4 Unterlegscheibe
Chamfer Tool for 16-63 mm Plastic Pipe
I needed a chamfer tool for two fittings and didn't want to buy one, so I designed my one.
The blade is held with two M2.5 screws, the threads are already included and work perfectly with my printer. If you don't have M2.5 screws at hand, simply cut in larger threads.
Update 2020-04-26
- Blade angle improved
- Blade can now be adjusted in the incision depth
You need:
1x Utility knife blade
1x M8 x 30-50 Hexagonal Screw
1x M8 Wascher
1x M8 Nut
2x M2.5 x 5-10 Screw
2x M2.5 - M4 Wascher
Viel Spaß damit
YourDiet
0.2 - 0.24 Layer thickness
3 - 5 Layers top/buttom
5 Shells
50% infill triangular
No Supports needed
if posible extrusion width 0.5 or more for extra streng
Date published | 21/04/2020 |
Time to do | 140 - 190 minutes |
Material Quantity | 16-20 meter |
Support Free | YES |