Anti Z Wobble / Vibration for Anet A8 (optimized)
Anti Z Wobble / Vibration for Anet A8 (optimized)
Published 2019-04-29T17:03:39+00:00
This design eliminates the vibrations of the Z axis produced by the extruder carriage. Slight improvements in the quality of the printed pieces will be obtained and also the noise produced when printing on very specific occasions will be reduced (for example when the car moves very fast).
It is designed for 608ZZ ball bearings (8mm inner Ø x 22mm outer Ø x 7mm high). I bought 10 units for 2 euros on Aliexpress.
I have created this design as compact as possible to avoid losing height in our printing area. I've designed it with FreeCAD 0.17
It has 9mm height, while the most widespread design throughout the internet has 20mm, so with this design we recover 11mm in height in our printing area. Likewise it reduces in a 25% the printing time.
In the last images you can see the difference of space occupied by the most popular design of the piece and my design.
Necessary:
- Print with supports in the cavity of the nut and screw head for a better result.
- 2x 608ZZ ball bearing
- 2x M3 screw
- 2x M3 nut
15/04/2019 - Design uploaded
16/04/2019 - Added two .stl more: left side and both sides in the same file.
---------------------------------------------------
Esta pieza elimina las vibraciones del eje Z producidas por el carro del extrusor. Se consiguen leves mejoras en la calidad de las piezas impresas y también se disminuye el ruido producido al imprimir en ocasiones muy puntuales (al realizar desplazamientos muy rápidos del carro).
Está diseñado para rodamientos 608ZZ (8mm Ø interior x 22mm Ø exterior x 7mm alto). Yo compré 10 unidades por 2 euros en Aliexpress.
He creado este diseño lo más compacto posible para perder la menor altura posible en nuestra área de impresión. Lo he diseñado con FreeCAD 0.17
Tiene 9mm de altura, mientras que el diseño más extendido por internet tiene 20mm, por lo que con este diseño recuperamos 11mm de altura en nuestra área de impresión. Así mismo se reduce en un 25% el tiempo de impresión.
En las últimas imágenes puede verse la diferencia de espacio ocupado por la versión más popular de la pieza y mi diseño.
Necesario:
- Imprimir con soportes en la cavidad de la tuerca y la cabeza del tornillo para un mejor resultado.
- 2x rodamiento 608ZZ
- 2x tornillo de M3
- 2x tuerca de M3
15/04/2019 - Diseño subido
16/04/2019 - Añadidos dos .stl más: lado izquierdo y ambos lados en el mismo archivo.
Date published | 29/04/2019 |
Material Quantity | 4 grams each one |
Dimensions | 49mm x 27mm x 9mm |
Technology | FDM |