Aperture Science Raspberry Pi Case V.1
Aperture Science Raspberry Pi Case V.1
Published 2018-03-06T12:26:14+00:00
This is a replica of the computer cases found in portal, but for a raspberry pi, Asus Tinker Board or any other device with the same board configuratin.
The case can hold up to three 30mm fans in the front and one 40mm fan on the side panel making it very good at cooling.
This is version 1 and it was one of my first CAD project in fusion 360 and as such is extreamly hard to edit. For this purpose I made a version 2 which is instead glued together instead and require very little if any support material.
Version 2 is still untested by me and as such is only avalable HERE
Chassi is the only file that needs support material. All the other files need to be oriented to the optimal rotation, as they are exported from fusion in the orientation that they fit together.
Print top.stl standing on the end to print without supports or print with supports internally if you prefere or have a low Z height on your printer.
Date published | 06/03/2018 |
Technology | FDM |
Complexity | Easy |