Arduino Maker Rail Prototyping Jig!
Arduino Maker Rail Prototyping Jig!
3D
Published 2020-02-06T16:15:11+00:00
With fall in the air, the urge to leave the beach and start working on electronics is starting to itch so to scratch it by developing an Arduino Prototyping Jig. Now I had already created a re-mix as a starter, then got thinking, what about the Nano and SainSmart relays? What about also expanding it from 20x20 maker rail to 20x40 for more stability so that is what I did! As my inspiration for this design came while sitting at my workbench as I faced the project from a "forward" angle and not top down. This made it uncomfortable to work with as all the pins as they were hard to see so figured why not tilt everything on a 30 degree angle so its easy to see? Well here we are and will keep adding to the collection so check back on a regular basis!
Maker Rail:
http://diy3dtech.com/maker-rail/
1-1/2-Inch Surface Grip Adhesive Non Slip Pads:
http://amzn.to/2xJuOeu
M3 Nut and Bolt Section:
http://diy3dtech.com/m3-nuts-and-bolts/
Arduino Uno Boards:
http://diy3dtech.com/arduino-uno-boards/
SainSmart Rely Boards:
http://diy3dtech.com/sainsmart-relay-boards/
Arduino Nano Boards:
http://diy3dtech.com/arduino-nano-boards/
Arduino Nano Screw Terminal Shields:
http://diy3dtech.com/arduino-nano-screw-terminal-expansion-board/
Major Favor: if you make one of these please post a MAKE and share it with the community :-) .
Also, please follow us on Thingiverse and give this a like if this came in handy and for more information on this project, please visit us at http://www.DIY3DTech.com as well as subscribe to our YouTube Channel at http://YouTube.DIY3DTech.com along with a visit to our drone site and YouTube channel at http://video-drone.DIY3DTech.com
If you are looking for one of a kind swag shop for yourself or a Maker Geek friend, visit our swag shop at http://Swag.DIY3DTech.com for unique 3D Printing, Laser Cutting and CNC swag! Too, if you want a behind the scene look at what we are working on be sure to follow us on Instagram (https://www.instagram.com/diy3dtech/ )!
Print Settings
Printer: I like these: http://diy3dtech.com/creality-cr-10-best-deals/
Rafts: No
Supports: No
Resolution: 0.2 or 0.3 (you pick)
Infill: 20%
Filament_brand: I like this one: http://diy3dtech.com/pla
Filament_color: You Pick
Filament_material: Either PLA: http://diy3dtech.com/pla or http://diy3dtech.com/petg
Notes:
Also if your looking for a collection of professional 3D print finishing tools take a look here: http://diy3dtech.com/3d-print-clean-up-tools/
| Date published | 06/02/2020 |