KS2AZT07 – Aztlan Traps
$15.00 KS2AZT07 – Aztlan Traps
3D
Published 2020-09-18T08:56:22+00:00
This set, Aztlan 7, is one of the core sets from the Aztlan Awakens Kickstarter. Traps models have been one of the biggest requests we had for Aztlan since we started. We knew that we wanted to make it the MAIN focus of the kickstarter we did, so we put everything we had into it! This set features 330+ models to enhance your Aztlan dungeons. Swing Traps, Panel Traps, Doomballs and Doomwheels - and so very much more!
TERRAIN Recommended Print Settings:
Layer Size: 0.15mm recommended, 0.1mm for smoother features
Infill: 10% recommended for all models
Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: 10+ lines of Brim can be helpful on some machines when printing small items like Trap Panels and Swing Weapons.
MINIATURE Recommended Print Settings:
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
SECRET WALLS Recommended Print Settings:
Layer Size: 0.2 mm maximum, 0.1mm used for most test printing
Infill: 10% recommended for all models
Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm) minimum. 8+ recommended
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Notes: Double Shift and Double Trouble Double Shift tiles use the same doors and tops. Ends of doors and insides of post need to be smooth for proper fit. If need be, file off any burrs or rough spots from areas where they rotate.
| Date published | 18/09/2020 |
| Price | $15.00 |
| Support Free | YES |