Azul Game Tiles
Azul Game Tiles
3D
Published 2019-06-05T07:05:14+00:00
Multicolor version of azul boardgame taking advantage of the make anything first layer color technique with a single extruder, if you're interested in juping into a project taking advantage of the technique, this is a worthy challenge.
The game requires 100 tiles of 5 different stiles plus a first player tile.
rules to the game can be found here:
google.ca/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=2ahUKEwjurtT45dDiAhX5HzQIHfNTAqgQFjAAegQIAhAC&url=https://www.planbgames.com/en/index.php?controller=attachment&id_attachment=9&usg=AOvVaw3amunUiHJUDxkt4DjdgYUX
All print components utilize the multicolor make anything single extruder printing technique who's tutorial can be found below:
https://www.youtube.com/watch?v=KV2AjyowXX4&t=770s
In order to play the game 20 tiles of each stiles are required except for a single 1st player tile.
each tile should be printed pattern first and body later, ensure to clean out ooze and stringing before starting econd print.
printed on 0.3mm although it can be brought down to 0.15mm for finer detail. From personal experience 0.3mm yelds better solid colors when printing although it makes delamination more likely.
6 top and bottom layers to give a good tile like feel
3 layers on sides
20% infill
heated buildplate is helpful to improve adherence especially in between prints.
In order to save time print multiple tiles in the same bed.
| Date published | 05/06/2019 |
| Time to do | - 1 minutes |
| Material Quantity | 3g |
| Dimensions | 16mm x 16mm x 5mm |
| Support Free | YES |