B5M Wheelie Bar Mount
$4.99 B5M Wheelie Bar Mount
Published 2020-07-08T14:36:00+00:00
This mount allows you to run a Traxxas style wheelie bar on the B5M platform for No-Prep Drag Racing.
This mount requires a B5M tower as the hole spacing on the SC5M tower is different. You can run a B5M tower on an SC5M chassis though.
I recommend using 4 M3x20mm Screws to hold on the wheelie bar.
You can use the SC5M body mount if you cut it in half and trim away a bit of plastic.
A good wheelie bar is the strc version. Part Number - ST3678W
Print in the orientation the model loads into your slicer (as shown in the photo with the supports). Use at least 5 layers of dense supports. 0.15-0.2mm layers have been shown to be the strongest (CNCKitchen). Print this part with at least 4 perimeters and at least 50-100% infill. I recommend printing with PETG, ABS, Nylon, or Polycarbonate. Print at a relatively high temp to get the best layer bonding possible.
| Date published | 08/07/2020 |
| Price | $4.99 |
| Dimensions | 61.5mm x 24.34mm x 61mm |
