B6 / B6D Wheelie Bar Mount


$4.99 B6 / B6D Wheelie Bar Mount
Published 2020-07-08T14:36:06+00:00
This mount allows you to run a Traxxas style wheelie bar on the B6/B6D platform for No-Prep Drag Racing.
You will need 2 M3x20mm screws to attach the mount to the top of the transmission housing.
I recommend using 4 M3x20mm Screws to hold on the wheelie bar.
A good wheelie bar is the strc version. Part Number - ST3678W
Print in the orientation the model loads into your slicer (as shown in the photo with the supports). Use at least 5 layers of dense supports. 0.15-0.2mm layers have been shown to be the strongest (CNCKitchen). Print this part with at least 4 perimeters and at least 50-100% infill. I recommend printing with PETG, ABS, Nylon, or Polycarbonate. Print at a relatively high temp to get the best layer bonding possible.
Date published | 08/07/2020 |
Price | $4.99 |
Dimensions | 46.1mm x 40.12mm x 61mm |