BackPlate adapter for anycubic photon v5
BackPlate adapter for anycubic photon v5
Published 2020-06-24T19:05:10+00:00
Hello everyone
Like many people, i had the need to print in a closed space and the fumes/smell of the resin was a big problem.
I found on thingiverse an Air Filter that used activated carbon palets and a HEPA filter that looked great and decided to give it a try.... and ... It WORKS.
Full discloser:
This filter system was made by RJ Maker and here is his links, i just made an adapter to fit it on to the anycubic photon:
- Original files https://www.thingiverse.com/thing:1305485
- and his youtube video that explains everything.
The adapter was printed on an ENDER 3 with regular PLA at 0.2 Layer wight with 50% infill.
The white bit you see in the image is Super Glue i used to glue it all together.
Usefull Links:
HEPA Filters for ROMBA VACUM CLEANER- https://www.aliexpress.com/item/4001177086630.html?spm=a2g03.search0306.3.28.4e8a218bw0rdLR&ws_ab_test=searchweb0_0,searchweb201602_0,searchweb201603_0,ppcSwitch_0&algo_pvid=988e674c-5353-4a7b-aed4-d55bc5888bfb&algo_expid=988e674c-5353-4a7b-aed4-d55bc5888bfb-7
Activated Carbon Palets 500g the ones used in aquarium filters (only needs one bag) - https://www.aliexpress.com/item/32657159330.html?spm=a2g0o.productlist.0.0.384f22eajyvZqp&s=p&ad_pvid=2020062411335813539400661776500005937052_2&algo_pvid=12ebfcd2-51e6-49a2-9ae8-ca0c8daf8cc0&algo_expid=12ebfcd2-51e6-49a2-9ae8-ca0c8daf8cc0-1&btsid=0ab6f83a15930236385873546e6078&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
Cooler 60cm 12v (note: you will only use 2 of the 4 wires, +12v and Gnd ) - https://www.ebay.com/c/1724658945
In the end, this reduced the smell in my shop about 85% and i tested with Elegoo ABS like resin, Anycubic Transparent Green resin and Anycubic ECO resin.
Best of Luck
Date published | 24/06/2020 |
Support Free | YES |