A new body for the OpenRC
You just replace the body parts from the OpenRC F1 with this body
I have included hub caps as well to complete the look.
This will work with 3D Printed Wheels and Rims or retail RC wheels as well.
All parts should be in the proper orientation
Only use supports from the bed to the model
Mid body doesn't need supports at all.
All parts are printed once with the exception of the rims and back light those are printed 4 times.
You will need several m3 nuts and bolts m3x8 should be good for everything
You will need 6 nuts and bolts to complete the body and an additional 7 to connect the body to the openrc chassis.
Before assembly I would make sure and insert all the needed nuts in place, friction should hold them in place but a drop of super glue could be used.
Also the cover and Mid2 has places for magnets to hold it in place.
It can fit 4x2mm disc magnets