BFB Buggy remote control
BFB Buggy remote control
3D
Published 2015-04-23T14:00:41+00:00
A while ago I saw this video and wanted to get the files, I eventually found and downloaded them
Recently re-discovered them on my computer's hard drive and decided to make it easier for people to find them.
If you have a smaller 3d printer you can print "roll cage", "roof" and "shell frame" separately instead of "090 shell" which is all 3 in one
here is the parts list:
https://drive.google.com/file/d/0BwKBw-6UgR1rWXZEZ1RhOHl2OEk/view?usp=sharing
here is an article about it:
http://www.hobbymedia.it/41275/bfbuggy-lautomodello-rc-stampato-in-3d
I'm not taking any credit for this creation i'm just sharing something cool
the roof file isnt actually the roof, i thought it was when i was splitting the body, it is actually the bonnet and boot
i did a quick estimate for the cost of materials
its about $16 @ $20/kg at 100% infill
Print at 0.2 mm layer height, with 10% infill. This uses 423g of filament and takes 77 hours and 27 minutes.
| Date published | 23/04/2015 |
| Material Quantity | 423g |
| Dimensions | 13 parts |
| Complexity | Difficult |